Utilizing Public Data of Building Energy for Fault Detection and Diagnostic Services in Smart City

Hyung-Min Cho; Chang-Young Park; Jin-Ho Kim; Hyang-In Jang

doi:10.22696/jkiaebs.20190052

All Issue

2019 Vol.13, Issue 6 Preview Page Next Page

Research Article

Utilizing Public Data of Building Energy for Fault Detection and Diagnostic Services in Smart City 스마트시티 고장발견진단 서비스 개발을 위한 건물에너지 공공데이터 활용방안 기초 연구

30 December 2019. pp. 599-608

PDF XML

Abstract

Fault Detection and Diagnostic (FDD) is an effective method to manage building energy use by correcting the wrong operation or malfunction. However, there are still limitations in general adoption of FDD due to the technical shortage and high cost. Utilizing the public data in the building energy management is suggested as a way to overcome these limitations in this study. The current status of public data management was investigated and then a framework for developing the FDD service using public data was suggested. In addition, setting the data points with priorities was proposed for the affordable and effective establishment of FDD. To spread the FDD to general types of buildings, the more cost-effective services are needed, and the proposed framework that utilizing the public data of building energy will be a way to bridge the technical and economic gaps.

Keywords

Fault Detection and Diagnostic

Building Energy Management

Smart City

Public Data

키워드

고장발견진단

건물에너지관리

스마트시티

공공데이터

References

Kim, W., Katipamula, S. (2018). A review of fault detection and diagnostics methods for building systems. Science and Technology for the Built Environment, 24(1), 3-21.

10.1080/23744731.2017.1318008

Park, S.C., Park, K.S., Song, Y.H. (2016). A Study on FDD Research Trends and Building HVAC Performance Variation with Faulty Status. Journal of Korean Institute of Architectural Sustainable Environment and Building Systems, 10(6), 443-448.

Wall, J. (2018, 3). Evaluation & Future Direction of Next Generation Automated FDD Tools in Australia. Presented at the WORKSHOP: Ventilation for indoor Air Quality & Cooling. Sydney, Australia.

Frank, S., Lin, G., Jin, X., Singla, R., Farthing, A., Zhang, L., Granderson, J. (2019). Metrics and Methods to Assess Building Fault Detection and Diagnosis Tools. Technical Report, NREL/TP-5500-72801, National Renewable Energy Laboratory, Golden, CO (United States).

10.2172/1503166

Korea Conformity laboratories. (2017). A Study on Improvement of Building Energy Efficiency System. Technical Report, Ministry of Trade, Industry and Energy, Sejong (South Korea).

Lee, T. (2014). A Study on the Development of KS BEMS Standard. Technical Report, Ministry of Lnad, Infrastructure and Transport, Sejong (South Korea).

Granderson, J., Lin, G. (2019). Inventory of Data Sets for AFDD Evaluation. Building Technology and Urban Systems Division, Lawrence Berkeley National Laboratory.

Ministry of Trade, Industry and Energy (MOTIE). (2018). Energy Consumption Survey.

U.S. Department of Energy (DOE). (2017). High-Impact Technology Catalyst.

Information

Publisher :Korean Institute of Architectural Sustainable Environment and Building Systems
Publisher(Ko) :한국건축친환경설비학회
Journal Title :Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
Journal Title(Ko) :한국건축친환경설비학회논문집
Volume : 13
No :6
Pages :599-608
Received Date : 2019-12-07
Accepted Date : 2019-12-14
DOI :https://doi.org/10.22696/jkiaebs.20190052

Journal of Korean Institute of Architectural Sustainable Environment and Building Systems ISSN:1976-6483(Print) 2586-0666(Online) 한국건축친환경설비학회논문집

All Issue