Barma, M.C., Saidur, R., Rahman, S.M.A., Allouhi, A., Akash, B.A., Sait, S.M. (2017). A review on boilers energy use, energy savings, and emissions reductions. Renewable and Sustainable Energy Reviews, 79, 970-983.10.1016/j.rser.2017.05.187
Cho, Y., Park, S., Joung, K. (2017). A Study on the Building Energy Efficiency Rating Changes by Enhanced Thermal Insulation Performance of Building Envelope Standards in Apartment Houses. Korean Journal of Air-Conditioning and Refrigeration Engineering, 29(2), 89-95.
Durkin, T.H. (2006). Boiler System Efficiency. ASHRAE Journal, 48(7), 51-57.
Lazzarin, R.M. (2012). Condensing boilers in buildings and plants refurbishment. Energy and Buildings, 47, 61-67.10.1016/j.enbuild.2011.11.029
Lazzarin, R.M. (2014). The importance of the modulation ratio in the boilers installed in refurbished buildings. Energy and Buildings, 75, 43-50.10.1016/j.enbuild.2014.01.043
Lee, M., Kim, W., Lee, W., Lee., W. (2012). A Study about Reduction Rates of Building Energy Demand for a Detached House according to Building Energy Efficient Methods. Journal of Architectural Institute of Korea (Planning and Design), 28(5), 275-282.
Lim, J., Kim, S., Song, S. (2014). Improvement of Design Criteria in Heating and Cooling Equipment According to the Consolidation of Design Standard for Energy Saving in Apartment Buildings of Korea. Journal of the Korean Solar Energy Society, 34(3), 89-97.10.7836/kses.2014.34.3.089
Moon, J. (2011). Impact of Reinforced Standard for Envelope Insulation on the Regional Heating and Cooling Energy Consumption. Korean Journal of Air-Conditioning and Refrigeration Engineering, 23(10), 646-655.10.6110/KJACR.2011.23.10.646
Rhee, K., Yeo, M., Kim, K. (2011). Evaluation of the control performance of hydronic radiant heating systems based on the emulation using hardware-in-the-loop simulation. Building and Environment, 46(10), 2012-2022.10.1016/j.buildenv.2011.04.012
Satyavada, H., Baldi, S. (2018). Monitoring energy efficiency of condensing boilers via hybrid first-principle modelling and estimation. Energy, 142, 121-129.10.1016/j.energy.2017.09.124
Seo, S., Park, J., Rhee, E. (2011). An Analysis of Thermal Loads Depending on Korea Building Insulation Standard and the Optimum Insulation Standard. Journal of the Korean Solar Energy Society, 31(5), 146-155.10.7836/kses.2011.31.5.146
VanWormer, C., Grassl, D. (2018). Best Practices for Condensing Boilers. ASHRAE Journal, 60(9), 18-27.
Yu, B., Seo, M., Moon, J., Lee, K. (2015). Analysis of the Part Load Ratio Characteristics and Gas Energy Consumption of a Hot Water Boiler in a Residential Building under Korean Climatic Conditions. Korean Journal of Air-Conditioning and Refrigeration Engineering, 27(9), 455-462.10.6110/KJACR.2015.27.9.455
Choi, S., Ryu, H., Yun, H., Kim, Y. (2018). The Study on Heating and Cooling Load Standard per Unit Area of Apartment. In Proceedings: Summer Conference of Air-Conditioning and Refrigeration Engineering of Korea, 200-203.
Rhee, K., Jung, G. (2019). Analysis of Heating Energy Saving Performance in Low-Energy Residential Buildings considering Boiler Part Load Efficiency. In Proceedings: Summer Conference of Air-Conditioning and Refrigeration Engineering of Korea, 736-739.
Arena, L. (2013). Measure guideline: condensing boilers-optimizing efficiency and response time during setback operation (No. DOE/GO-102014-4369). National Renewable Energy Lab. (NREL), Golden, CO (United States). 8-9.10.2172/1220986
Building Research Establishment Ltd. (BRE). (2016). SAP heating efficiency calculation for condensing boilers. Consultation paper.
Chartered Institution of Building Services Engineers (CIBSE). (2004). CIBSE Guide F., 2nd ed., Energy efficiency in buildings. Ch.10 Heating and hot water design.
Henderson, H., Huang, Y.J., Parker, D. (1999). Residential Equipment Part Load Curves for Use in DOE-2. LBNL report.10.2172/6519
Korea District Heating Corporation (KDH). (2018). Design Criteria for Heating Facility.
Land and Housing Corporation (LH). (2018). Design Criteria for Heating Facility.
Ministry of Land, Infrastructure and Transportation (MOLIT). (2018). Building Design Standards for Energy Saving: The Notification of Ministry of Land, Infrastructure and Transportation; Korean Government: Seoul, Korea.
Designbuilder. (2018). EnergyPlus Simulation Documentation for DesignBuilder v5. Designbuilder Software Ltd., London.
DOE. (2017). EnergyPlus version 8.8.0 Documentation: Input and Output Reference, 805-811.
- Publisher :Korean Institute of Architectural Sustainable Environment and Building Systems
- Publisher(Ko) :한국건축친환경설비학회
- Journal Title :Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
- Journal Title(Ko) :한국건축친환경설비학회 논문집
- Volume : 14
- No :1
- Pages :124-135
- Received Date :2020. 01. 28
- Revised Date :2020. 02. 03
- Accepted Date : 2020. 02. 04